1/2 Inch x 100 Feet Bulk Soaker Hose
This bulk soaker hose offers low and consistent water pressure that allows for an efficient flow of water directly to a plant’s root zones.
Outer Diameter: 0.70”
Inner Diameter: 0.50”
GPH: 142 per 100’ at 25 psi
A 1/2” soaker hose can be run in lengths of up to 150’, and it’s recommended that you not run more than 500’ of hose off any single water supply. 100’ of the 1/2” hose will run a flow rate of approximately 142 gallons per hour (GPH) at 25 psi, however that may vary depending on inlet pressure and water hardness. Generally, a shorter length of hose will result in higher GPH.
NOTE: A soaker hose should be used on flat surfaces not exceeding 2’ rise over 100’. A pressure regulator is required because a soaker hose is designed to work at low pressure. There are also NO fittings on this hose, which means you can cut to desired lengths to create your own custom system.
Features and Benefits
- Eco-Friendly: Made from recycled materials, 70% from recycled rubber and 30% recycled polyethylene products that are re-pelletized for use in the process
- Conserves Water: When more water goes where you need it, less goes where you don’t
- Easy to Install: No special equipment is necessary. Easily attaches to outdoor spigot
If you want to order in bulk, visit our Reseller page.Learn More