1/4 Inch x 500 Feet Bulk Soaker Hose
This bulk soaker hose offers low and consistent water pressure that allows for an efficient flow of water directly to a plant’s root zones. It is ideal for watering vegetables and looped around trees and shrubs.
Inner Diameter: 0.25”
GPH: 65 per 50’ at 25 psi
A 1/4” soaker hose can be run in lengths of up to 15’ for small areas such as pots, planters and window boxes. 50’ of the 1/4” hose will run a flow rate of approximately 65 gallons per hour (GPH) at 25 psi, however that may vary depending on inlet pressure and water hardness. Generally, a shorter length of hose will result in higher GPH.
This is the size normally used in clay soils around foundations, usually in the state of Texas. Please be sure this is the size you want. Return shipping may be costly as the hose is heavy. If you are not sure, please send us a message.
NOTE: A soaker hose should be used on flat surfaces not exceeding 2’ rise over 100’. A pressure regulator is required because a soaker hose is designed to work at low pressure. There are also NO fittings on this hose, which means you can cut to desired lengths to create your own custom system.
Features and Benefits
- Eco-Friendly: Made from recycled materials, 70% from recycled rubber and 30% recycled polyethylene products that are re-pelletized for use in the process
- Conserves Water: When more water goes where you need it, less goes where you don’t
- Easy to Install: No special equipment is necessary. Easily attaches to outdoor spigot
If you want to order in bulk, visit our Reseller page.Learn More